If you have been involved in a motorcycle accident in the construction sector on an Interstate highway, there are several factors you should know to protect your rights. One of these factors is Distracted or inattentive driving. Another is the presence of unmarked trenches, pits, and road barriers. You should take pictures of the scene of the accident as well as get the necessary information about anyone else that was at the scene. Take geotagged selfies and gather contact information about any other parties involved.

Distracted or inattentive driving

There are many factors that contribute to motorcycle accidents on Interstates, including faulty road signs, distracted or inattentive drivers, and defective construction zones. Construction zones are particularly dangerous for motorcycle riders, who face the highest risk of fatalities in the sector. In order to avoid these accidents, riders can conduct pre-ride safety meetings and review traffic reports to ensure that they are not distracted or inattentive while driving.

Statistics indicate that distracted or inattentive drivers are responsible for an estimated 16 percent of highway deaths and injuries every year. Distracted drivers are particularly dangerous for motorcycle riders, who are more prone to distractions. The cellphone use while driving increases a driver’s risk of an accident. In addition to a higher risk of injury, distracted drivers may not be aware of construction workers and are likely to hit them.

Drivers who are inattentive or distracted cause nearly half of all motorcycle accidents. These drivers can be hundreds of yards away from motorcycles and fail to react to them in time to prevent serious accidents. These negligent drivers also endanger pedestrians and other road users. Distracted or inattentive drivers are also more likely to be at fault in motorcycle accidents than other drivers.

Road barriers

There are many potential causes of a motorcycle accident in the construction sector on Interstate. The construction sector can disrupt normal driving patterns and cause riders to be sandwiched between cars. The result of a construction zone accident can be devastating to both the driver and the rider. To minimize the risk of a construction-related motorcycle accident, careful preparation is essential. Listed below are the most common causes of motorcycle accidents. All of these injuries can be prevented if you take the proper precautions.

Impatient drivers often tailgate in construction zones. These drivers can throw motorcyclists off their bikes. Distracted drivers also cause rear-end collisions. Speeding motorists can also cause devastating injuries or fatalities. In addition, motorcycle riders often experience road barriers that are designed to protect passenger vehicles. If they hit a construction zone, the driver may not notice the lane they are in. When the motorcycle rider hits the road barrier, the rider may lose control and crash into the barrier.

One of the most common causes of motorcycle accidents in construction zones is faulty road signs. Faulty construction zone signage can cause chain collisions. Motorcycle riders are the most vulnerable to accidents in construction zones. Although suing construction zone sign makers will not bring your loved one back, it can help protect you from accidents. Conduct a safety meeting before a motorcycle ride. Study traffic reports and recent construction zone accidents to ensure your safety before riding.

Unmarked trenches

Having a motorcycle accident on Interstate highways is more common than you might think. The construction sector causes a sudden change in driving patterns and, if you’re not careful, you could get caught between two cars. A construction zone also presents a serious legal issue, as any driver with distracted attention could hit your bike and cause a catastrophic accident. Here are some tips for motorcycle riders to avoid an accident on construction sites.

Road construction often leads to the formation of road barriers and construction pits. These structures should be roped off to protect other motorists. Then, a motorcycle rider can hit one of these barriers, flipping it into his or her tire. A sharp end will penetrate the tire, causing a blowout. The rider may have little time to react, so the impact can be fatal. However, if the bike hits a barricade, the impact can cause severe injuries and debilitating effects.

Unmarked pits

An unmarked pit on a highway is a nightmare for riders. Heavy weather can damage barricades indicating the presence of an open pit. Additionally, workers may have not performed a thorough site inspection. When workers open the pits with shovels for maintenance, they can accidentally impale riders who fall in. Unmarked pits are dangerous because they can contain sharp pieces of rebar.

Animals killed in construction zones

A motorcycle accident is not the only cause of animal deaths. A construction zone can also be home to melted ice from food trucks. These puddles can obscure unmarked potholes or utility hole covers. A motorcycle accident can also occur when a construction worker fails to properly warn drivers about these hazards. As a result, the accident can be much more dangerous. In such cases, a motorcycle-accident survivor can file a lawsuit against the construction company for its negligent failure to warn them of these hazards.

Despite the risk, road construction zones remain necessary and essential. Keeping roads safe, free of potholes and clean can be a challenge for motorcycle riders. Even a single pothole can kill a motorcycle rider and may even injure innocent bystanders. Hence, motorcycle riders need to be cautious when driving through these zones. Here are some tips to prevent motorcycle accidents in construction zones. Once you have informed yourself about the dangers of road construction zones, you can make proper decisions regarding your safety.

Compensation for injuries

A motorcycle accident can leave the victim unable to work and provide for their family. In addition to pain and suffering, many injuries result in a loss of enjoyment in activities. As such, compensation is necessary to replace or repair damaged property and pay for medical bills. In some cases, victims are entitled to a portion or all of their lost wages. If your accident caused your financial loss, a construction injury lawyer can help you determine how much compensation you deserve.

The amount of compensation you can recover for your injuries depends on many factors. An experienced Palm Desert Motorcycle Accident Attorney can give you a ballpark figure for your financial recovery. However, if you were partially at fault, you can still receive some compensation. In such a case, the court will reduce the final amount based on the percentage of fault. Furthermore, more severe injuries usually have a higher value than less serious ones, as they result in higher medical expenses, lost wages, and life-altering effects.

If you have sustained an injury at a construction site, seek medical attention immediately. Keep track of all receipts and medical records to document the extent of your injuries. If possible, take pictures of the accident site and note witnesses. These records will help you assess your damages claim. Your medical records will be a valuable asset in your compensation claim. When you contact a construction accident lawyer, they will help you decide how to proceed.